Yarn Loop level guide
Yarn Loop Level 567 Walkthrough
On Level 567, the red center disc, the green outer ring, and the small top leaf details must all shrink together. The main jam window is about 01:40-02:20, when the badge has already been reduced to a red half-disc with thin green edges and a few tiny green fragments above it. Break the badge evenly, tap the top green details whenever they open, and avoid leaving one curved rim segment to carry the whole finish.
Verified Board Notes
- Initial Layout Geometry
- The opening board is a round red badge with a green rim, three small green leaf-like marks floating above it, and a dark background around the circular center.
- Goal / Target Area
- The red center disc, the green outer ring, and the small top leaf details must all shrink together. If the red disc drops too fast while the green rim stays wide, the run drags on a broken arc plus a few detached green marks near the top.
- Opening Moves
- Start by cutting into the red circle and the green rim at the same time. Keep touching the little green marks above the badge early so they do not survive into the final minute as separate floating scraps.
- Danger Zone
- The main jam window is about 01:40-02:20, when the badge has already been reduced to a red half-disc with thin green edges and a few tiny green fragments above it. Pressure eases only after the remaining rim arc and the top green marks finally disappear together.
- Unique Mechanics
- Level 567 is a compact ring-cleanup level. The board is small, but it punishes one-sided clearing because the outer green arc and the tiny top details can easily outlast the obvious red center.
Quick Tips for Level 567 (spoiler-free)
- Clip the three small green marks above the badge as early as they become reachable — each one you clear before `01:40` is one fewer floating fragment to handle at low pressure near the end.
- Rotate between the red disc and the green outer arc every few moves so neither side stays disproportionately large — an unbalanced badge stalls at the last curved segment.
- During `01:40-02:20`, the remaining thick green rim section takes priority over the tiniest red crumbs because the rim is the piece that most often outlasts everything else.
How to Solve Yarn Loop Level 567 — Full Solution
- Start on the red center disc and the green rim together, cutting both at the same time.
- Clip the three small green marks above the circle as soon as they become reachable.
- Rotate between the red disc and the outer green arc every few moves so neither side dominates.
- During `01:40-02:20`, remove the last thick green rim segment before chasing the smallest red crumbs inside the ring.
- Take the final top green fragments and any thin red pieces still inside the ring together to close.
Common Mistakes to Avoid
- Attempting to solve without mapping the entire dependency chain between all color routes.
- Treating all colors as equal priority — find the route that will be blocked first and clear it.
- Missing the cascade technique: intentionally opening one route to unlock two subsequent clears.
Frequently Asked Questions
Why does Level 567 still drag after the main picture opens up?
The trouble starts when the badge has already been reduced to a red half-disc with thin green edges and a few tiny green fragments above it. The pace usually settles only after the remaining rim arc and the top green marks finally disappear together.
What should I prioritize during `01:40-02:20` on Level 567?
Start on the red center and the green rim around it together. When one green rim arc is still thicker than the remaining red center, clear that arc first so the badge does not end as a long curved leftover.
Which leftover piece should not be saved for last on Level 567?
Most slow finishes happen when the red disc drops too fast while the green rim stays wide. The run drags on a broken arc plus a few detached green marks near the top. Level 567 is a compact ring-cleanup level.