Sponsored

Yarn Loop level guide

Yarn Loop Level 967 Walkthrough

medium 4 colors

Clear the field of black up arrows so the parked reds can reach the down arrow in the center.

Sponsored

Verified Board Notes

Initial Layout Geometry
Rows of dark up arrows fill a white rectangle around one red down arrow. The columns start with gray 40, red 30 and dark gray 50.
Goal / Target Area
Remove the outer arrows and strip the pale outline around the center so the reds can take the core.
Opening Moves
Start with right dark gray 50, left gray 40, middle red 30 and right black 50, then left white 50.
Danger Zone
Four parked reds fill slots one through four. Re-send the gray, white or near-black return from slot five until the fourth red is ready.
Unique Mechanics
Three numbered supply covers count down independently as their columns are used, exposing the hidden entries.

Storage: the five slots where returning bobbins park until their color is reachable again.

Quick Tips for Level 967

  • Re-send dark gray 27 from the opening while the outer arrows still have dark stitches.
  • Keep sending the exposed black 50 and white 50 even as parked reds pile up.
  • When the outline comes off, send the fourth parked red, a 20, before the other reds.

How to Solve Yarn Loop Level 967 — Full Solution

  1. Start with right dark gray 50, then left gray 40 and middle red 30. Send the black 50 exposed on the right. Red comes back at 30 on its first lap.
  2. Send left white 50. Re-send dark gray 27 when it returns, then the white 1 return and the gray 40 raised in the left column.
  3. Work the left supply down to gray 30 and send from the right column to raise white 50. Send the exposed white and dark at the outer arrow tips.
  4. Send the exposed dark 50 and gray 40 as the counters run out and the question-mark entries appear.
  5. Send the first exposed right red 20 to advance the supply beneath it. It parks beside red 30; give the dark 50 and white track space.
  6. Send left black 50 and white 50, then middle red 10. When red 10 parks with the other reds, send middle white 40 on the arrow field.
  7. Send the next right red 20, then the exposed dark 40 and black 50. Leave the four reds parked and re-send whatever lands in slot five.
  8. As the outline releases, re-send red 20 from storage slot four. Cycle the white and gray returns to strip the arrow's two pale sides.
  9. Re-send red 10, red 20 and red 30 as the white border goes. Red 2 takes the final fleck.

Colors in this level:

Gray, Black, White, Red

Common Mistakes to Avoid

  • Extra laps with red 30 while the outer arrows are intact waste a track place the early dark gray return needs.
  • Re-sending all the parked reds as soon as storage fills, which leaves less room for the white and gray that strip the outline.

Frequently Asked Questions

  • Why does the first red 30 come back untouched?

    The center arrow is still outlined and surrounded by the black-and-white field. Clear the grayscale yarn outside it first.

  • What should I do when four red bobbins and a gray fill storage?

    The red 20 in slot four goes out first, once white and dark have cleared the surrounding threads.

  • What do the three counters under the supply mean?

    They count down as you send from those columns. When a cover is used up, the hidden entry beneath it is exposed.