Sponsored

Yarn Loop level guide

Yarn Loop Level 989 Walkthrough

medium 13 colors

Peel the black backing away from the striped figure. Work through the three covered columns, then make room for the linked returns before the last yellow stitch.

Sponsored

Verified Board Notes

Initial Layout Geometry
An orange-faced figure with a purple cap and a raised gray hand stands on black knit. The opening supply reads black 50, dark gray 10, black 50, purple 20 and black 40. Three middle covers each read 3.
Goal / Target Area
Clear the outside black rectangle, then the gray outline and the figure's diagonal color bands.
Opening Moves
Send the two black 40s on the far right first. Follow with the far-left black 50 and the two black 50s from column 3.
Danger Zone
Around the middle of the run, purple 0 and orange 18 occupy two storage places together while the bright supply fronts are still waiting.
Unique Mechanics
The center cover ticks down through two black 50s to light gray 20. A late green 0 stays attached to purple 2 and must be returned as a pair.

Storage: the five slots where returning bobbins park until their color is reachable again. Linked: bobbins joined by a bar leave together and take one track place each.

Quick Tips for Level 989

  • Both opening black 40s come from column 5. The far-left black 50 goes after them.
  • After the second center black 50, look for the light gray 20 above the cover.
  • Leave enough track space for green 0 to travel with purple 2 at the end.

How to Solve Yarn Loop Level 989 — Full Solution

  1. Start at the far right. Send black 40, then the second black 40 directly underneath. Send black 50 from the left to keep stripping the backing.
  2. Take the black 50 in column 3 and the second black 50 it reveals. The cover in the middle drops to 1 and brings up a light gray 20.
  3. Use column 2 dark gray 10, black 50 and blue 20 in that order as the track frees up. Blue parks briefly after its first run. The two gray 20s next to each other go together.
  4. Send the far-left orange 30 and olive 10. Use the purple 20 and pink 20 fronts as the middle covers lift. Give the linked purple 30 and orange 30 two track places when they come up.
  5. If purple 0 and orange 18 park together, leave room to return both. Use the surrounding grays and greens to get past the gray outline while the colored bands are still intact.
  6. When the figure shrinks to stripes and a few gray dots, send orange 30 from column 2. Then send green 20 from column 2 with the purple 20 linked to it in column 3. Leave blue 15 parked while they work, and re-send it once gray has nearly cleared the last strip.
  7. Send the linked cyan 10 and olive 10 near the end. Return the parked blue 6 when a place opens, then send red 20 from the remaining left column.
  8. Send the yellow 10 below red and bring back the linked green 0 and purple 2 once both can enter. Let their lap finish and watch yellow 1 take the last dot.

Colors in this level:

Black, Gray, Purple, Blue, Cyan, Orange, Pink, Green, Olive, Red, Yellow, Dark gray, Light gray

Common Mistakes to Avoid

  • Taking the center black 50 before the two right-hand black 40s. The right stack starts the clear and uncovers green farther down.
  • Trying to send only the purple half of the late pair. Green 0 still travels with it, so the pair needs two places.

Frequently Asked Questions

  • What should I send from the three covered columns first?

    Work down the center with the two black 50s. The dark gray 10 in the column to its left goes after those two, before that column's black and blue.

  • Why is a purple bobbin parked at 0 with orange 18?

    The pair is still linked, so purple 0 rides along while orange keeps stitching. Re-send them together; orange comes back at 10 and goes out again.

  • Where are the late red and yellow bobbins?

    They are stacked in the far-left column, with red 20 above yellow 10. You can reach them after sending the cyan and olive pair.