Yarn Loop level guide
Yarn Loop Level 1021 Walkthrough
Unpick the brown face and the blue bird perched above it, along with the purple outline and the purple and yellow band below the bird.
Verified Board Notes
- Initial Layout Geometry
- A blue bird with a yellow beak and cyan wing perches above a brown face with orange ears and muzzle. The five supply tops are purple 20, orange 10, blue 10, cyan 10 and purple 20.
- Goal / Target Area
- Break through the brown lower edge to expose black facial stitches, then pull the blue and yellow stitches out of the bird.
- Opening Moves
- Send column 2 orange 10, then the linked purple 20 and black 10 that span the first two columns. Send column 1 brown 30.
- Danger Zone
- The first purple and black link takes up two storage slots even after purple reaches zero. Two blues and a cyan can crowd the same row.
- Unique Mechanics
- The dark stitches only become useful targets late, so the opening purple 0 and black 10 come back together.
Storage: the five slots where returning bobbins park until their color is reachable again. Linked: bobbins joined by a bar leave together and take one track place each.
Quick Tips for Level 1021
- Re-send orange 2 while brown works around the muzzle.
- When the right blue 10 and brown 20 return at blue 3 and brown 0, re-send the link to spend those three blue stitches.
- Save the first full blue 10 that parks for the blue islands left after the yellow and purple links.
How to Solve Yarn Loop Level 1021 — Full Solution
- Send orange 10 from column 2. Send the left purple 20 with the black 10 now exposed in column 2, then send brown 30 from the left stack.
- Return orange 2 to clear its remaining edge stitches. Send cyan 10 to lower column 4, and send the linked right purple 20 and orange 10 when space opens on the track.
- Send column 1 blue 10 and the diagonal linked purple 10 and orange 10 that follows across the two left columns. That blue comes back as blue 9. Re-send the purple 0 and black 10 pair once the mouth begins to open.
- Send the orange 10 in column 3. Leave the blue 10 it uncovers in column 3 for much later. Return the smaller blue remainder for the blue patches opening on the bird. Keep blue 10 in slot 2 and blue 9 in slot 3 parked.
- Send left brown 10 to cut farther into the sides of the face. If the spent purple and its black partner return together, leave room to re-send them. Return cyan 10 for the edge of the bird.
- Send pink 10, then black 10 from the right column. They open the linked blue 10 and brown 20 across columns 4 and 5. Re-send the blue 3 and brown 0 return when it parks.
- Send the next orange 10 in column 4, then the brown and purple on that side. Re-send blue 9 once the horizontal band below the bird opens.
- Send the exposed yellow and purple links, including the pink, purple and yellow triple. Return purple 0 and yellow 1, then send purple 10 with brown 10 across columns 3 and 4.
- Send the last brown 10 and return the saved blue 10. The brown patch below the bird and the two isolated blue marks clear on the same circuit, and blue takes the last stitch.
Colors in this level:
Purple, Orange, Blue, Cyan, Brown, Black, Pink, Yellow
Common Mistakes to Avoid
- Treating the purple 0 as an open storage slot leaves too little room for the black partner's return.
- Sending the parked full blue 10 while purple still surrounds the bird ties up a track place before blue can reach the center.
Frequently Asked Questions
How do I expose the black bobbin behind the starting orange?
Send orange 10 from column 2 first. Black 10 sits directly below it and is linked to the left purple 20.
Which blue bobbin should I use in the middle of the level?
Start with the partial blue return, and keep the full one parked while you clear the purple and yellow band.
Why does purple 0 keep coming back with black 10?
The spent purple stays linked to black 10 until both finish. The pair returns together and needs two track places each time.