Sponsored

Yarn Loop level guide

Yarn Loop Level 1023 Walkthrough

hard 13 colors

Peel the gray plate, the orange strips and the green stalks, then clear the white and yellow stitches of the fried egg.

Sponsored

Verified Board Notes

Initial Layout Geometry
The gray plate surrounds a yellow-and-white egg. Orange strips sit on the left, green stalks are above and a small orange disk with a white rim sits at the top right. Four columns open with dark gray 30, silver 20, orange 30 and dark brown 20.
Goal / Target Area
Strip the plate edge and open the green stalks before the white and yellow stitches around the yolk become accessible.
Opening Moves
Send two gray 30s from column 1, then the linked silver 20 and orange 30 from columns 2 and 3. Next, send dark brown 20 and silver 20 from column 4.
Danger Zone
Burgundy 4 with white 0 and olive 5 with silver 0 fill four storage places. The incoming gray 9 can fill the fifth.
Unique Mechanics
The white and silver at zero still count toward the two track places that each linked return needs.

Storage: the five slots where returning bobbins park until their color is reachable again. Linked: bobbins joined by a bar leave together and take one track place each.

Quick Tips for Level 1023

  • Send both gray 30s on the plate before taking orange from the middle pair.
  • Later, two pairs with spent partners fill four storage places, and gray 9 takes the fifth.
  • Keep the final column 4 white 10 for the white islands under the dark brown and olive link.

How to Solve Yarn Loop Level 1023 — Full Solution

  1. Send both gray 30s from column 1. Send the linked silver 20 and orange 30 across the middle columns, then right dark brown 20 and the silver 20 under it.
  2. Re-send the silver 0 and orange 10 return along the left strips. Send bright green 10 from column 3 and red 10 from column 2, then the linked white 40 and burgundy 10 across columns 3 and 4.
  3. Send brown 20 from column 2 and the linked dark green 20 and gray 20 across the left two columns. Re-send red 4 and brown 12 as the lower edge opens.
  4. Send the next gray 30 and left olive 20 to reach white 10 and dark green 10 in the first two columns. Re-send the burgundy and white while the egg's lower rim still has white stitches.
  5. Send orange 40 and the bright green 10 and white 20 pair down the right. Return red 8 and brown 4 for more of the edge, then send the right yellow 10 when it is exposed.
  6. Send left dark brown 10 and return burgundy 5 and white 0. Send the newly exposed olive and gray on the left, then the white 10 and olive 10 link across the right two columns.
  7. Re-send bright green 5 and the brown 1 return around the stalks. Send the linked olive 20 and silver 20 across the left columns, then the newly exposed dark gray, red and dark green supply as the plate narrows.
  8. Clear the packed storage row in this order: gray 9, then burgundy 4 with white 0, then olive 5 with silver 0. Re-send the smaller returns before sending the fresh brown 10 and orange 20 link.
  9. Re-send brown 4 and orange 0 after the left orange strips break into small pieces. Send the gray 20s and yellow 10s to clear the plate fragments and the yolk.
  10. Re-send brown 1 with orange 0, and yellow 1. Send the linked dark brown 10 and olive 10 across columns 3 and 4, then the white 10s below them. The last white on the right takes the isolated white stitches.

Colors in this level:

Gray, Dark gray, Silver, Orange, Dark brown, Brown, Bright green, Dark green, Olive, White, Yellow, Red, Burgundy

Common Mistakes to Avoid

  • Filling the track with fresh brown and orange while all five storage slots are full leaves too little room for both returning pairs.
  • Sending the white 10s while the right dark brown and olive are still in supply leaves stitches behind the diagonal edge.

Frequently Asked Questions

  • What do I send when storage fills with gray and two linked pairs?

    Put the solo gray 9 on the track, then burgundy 4 with white 0, and finally olive 5 with silver 0. That order clears all five storage places.

  • Why does the last brown bobbin need two track places?

    Brown 1 is still linked to orange 0, even after the orange strips are gone. Both must go out to reach the brown stitch.

  • Why do white 0 and silver 0 still take track places?

    Each is still linked to a partner with yarn left, burgundy for white and olive for silver. The pair needs two track places until both are done.