Yarn Loop level guide
Yarn Loop Level 52 Walkthrough
Level 52 focuses on unraveling the stitched message board without locking the five-slot tray. The overlapping blue background, white letters, and heart layers need to come off in order so dropped spools can match the target bubbles below. Favor edge spools that already have a clear target instead of stuffing the tray with colors that must wait.
Quick Tips for Level 52 (spoiler-free)
- Open with the bottom-left blue spool and the bottom grey spool to start freeing the perimeter.
- Use the right red spool and top orange spool only after the outer strings have room to drop into the tray.
- When the tray is crowded, tap a spool only if a matching target bubble is ready below.
How to Solve Yarn Loop Level 52 — Full Solution
- Start with the bottom-left blue spool, then tap the bottom-edge grey spool to clear the outer border strings.
- Tap the right-edge red spool and the top-edge orange spool to widen the perimeter around the board.
- Use the exposed yellow spools once the overlapping top layers above them have been removed.
- Prioritize any spool whose matching target bubble can clear immediately so the five-slot tray stays open.
- Work inward through the remaining blue background and white text until the last spools chain into their target bubbles.
Common Mistakes to Avoid
- Clearing the easiest color first rather than the one blocking other loop routes.
- Closing a narrow lane that a same-colored yarn path needs later.
- Forgetting that each cleared loop creates new open paths — always reassess after each clear.
Frequently Asked Questions
Why does the tray fill up late in the level?
Near the end, white, orange, red, yellow, and blue can all land in the tray before the matching target bubbles resolve.
What should guide the order after the opening edge taps?
Follow the overlapping layer order and favor spools that already have a matching target bubble waiting below.
When should the yellow spools be used?
Bring them in after the top-right and bottom-middle yellow sections are exposed instead of forcing them through covered layers.