Sponsored

Yarn Loop level guide

Yarn Loop Level 972 Walkthrough

hard 9 colors

Clear the blue water, the four counted tiles and the pirate ship side by side. The dark hull stub goes last, after the final blue checks and red stripe.

Sponsored

Verified Board Notes

Initial Layout Geometry
Four spotted ice tiles sit above a pirate ship with dark masts, purple windows, red and orange cargo patches and a checkered blue water band. Opening row: navy 30, red 10, blue 40 and purple 10.
Goal / Target Area
The ice tiles above the ship and the blue checks below it are separate jobs. The last red stripe and dark hull cells outlast the tiles.
Opening Moves
Send navy 30 from column one and blue 40 from column three. Their columns then show maroon 20 and red 20.
Danger Zone
Early black 50 and white 10 can be on the track with only one place free and the maroon and red returns parked. Check free track space before sending another return.
Unique Mechanics
Each of the four tiles above the masts clears on its own. Cyan 2 and cyan 1 finish the last tiles while blue stitches remain in the water.

Storage: the five slots where returning bobbins park until their color is reachable again.

Quick Tips for Level 972

  • Open with navy 30 and blue 40. Navy 18 and blue 25 are the same two bobbins partway through their run.
  • Save cyan for the tiles above the masts. A cleared tile drops off even while the water stays.
  • Check the bottom edge before the last red stripe. A few blue checks can outlast the tiles.

How to Solve Yarn Loop Level 972 — Full Solution

  1. Send navy 30 from column one and blue 40 from column three. Both start on the blue checks below the hull.
  2. With three places free, navy 18 and blue 25 are on the track. Maroon 20 and red 20 now front their columns.
  3. Re-send navy 16 from storage slot one. Send left maroon 20, then the right red 20 and the red 10 behind it. Bring in navy 20 and purple 10 next.
  4. Send cyan 20 from column four to start the tiles, then white 30. Cyan reaches the right-hand tile before the first black 50 enters.
  5. Let the first black 50 and white 10 run. Later, the cyan 20 in column one exposes a fresh black 50. Check the parked purple 8, purple 1 and red 11 before sending it.
  6. Send cyan 2 and cyan 1 at the remaining left tiles. With the tiles gone, check the water: a line of blue may still be attached to the hull.
  7. White 8 works the cabin and orange 8 the cargo patch to the right while the hull and water passes continue.
  8. When only a few blue checks remain below the red stripe, keep re-sending the blue return until they are gone.
  9. Re-send red 9 on the stripe. Purple 4 and purple 3 take the remaining purple patches; the dark stub stays.
  10. Send the exposed maroon 30 as the hull narrows. Maroon clears the final dark patch.

Colors in this level:

Blue, Navy, Maroon, Red, Purple, White, Cyan, Orange, Black

Common Mistakes to Avoid

  • Reading "three places free" as three bobbins on the track. The badge counts free places.
  • Ignoring the blue return once the top tiles are gone. The last water stitches under the red stripe get stranded.

Frequently Asked Questions

  • Does the 3 on the track badge mean three bobbins are running?

    No, it means three places are free. Blue 25 and navy 18 are on the track at that point.

  • Can I work the hull while the ice tiles are still up?

    Yes, the hull thins during the tile runs. Treat the cyan returns above the ship and the blue returns below it as separate jobs.

  • How do I tell the two black 50s apart?

    The first runs on the track with white 10. The second is exposed in supply while purple 8, purple 1 and red 11 sit in storage.