Yarn Loop level guide
Yarn Loop Level 973 Walkthrough
Open the navy background and the face together, then cycle the lower bands until only the small mixed cluster at the muzzle is left.
Verified Board Notes
- Initial Layout Geometry
- A black-and-white face with green eyes, pink cheeks and a blue background, with cyan, tan and purple bands below. Supply fronts: navy 40, cyan-blue 20 and blue 30.
- Goal / Target Area
- Clear the navy area above the face and the bands below while white and black shrink the middle. The compact muzzle cluster goes last.
- Opening Moves
- Send left navy 40, right blue 30, then middle cyan-blue 20. The left column then shows white 40, with gray 10 and black 50 below it.
- Danger Zone
- The track fills while blue 20, white 20 and tan 14 are parked together. Note which slot each one is in before places free up.
- Unique Mechanics
- Icy supply bobbins change their numbers while still in the columns. Read the current count to tell them from the regular blue and cyan returns.
Storage: the five slots where returning bobbins park until their color is reachable again.
Quick Tips for Level 973
- After the opening, a blue 20 can park in the first storage slot while the gray and dark runs start.
- Send the left black 50 while most of the face is still up. Black 46 is that same bobbin on the track, not a new one.
- Icy supply bobbins change their numbers before they can be used. Re-read the count before you tap.
How to Solve Yarn Loop Level 973 — Full Solution
- Send navy 40 from the left, then blue 30 from the right. The left column shows white 40.
- Send middle cyan-blue 20, then let purple 20 run while the center column exposes red 20. A separate cyan 20 sits on the right.
- Send left white 40 into the face. Re-send the blue 20 and purple 4 returns, then send left gray 10 and the black 50 under it.
- If storage holds blue 20, brown 15 and black 26, let the active passes finish and re-send the returns as slots open. Blue 20 can stay parked.
- When the track is full with blue 20, white 20 and tan 14 parked, wait. Then re-send white and tan onto the face and lower bands.
- Send the exposed cyan 20 into the band under the face. Save the blue return for the background above and to the left; a blue patch survives there after the right side opens.
- Run the purple along the bottom. Purple 14 can park beside red 10. Use the remaining purple where the bottom band is still attached; the green outline thins with the face.
- Once the last left blue patch and the tan strip are gone, send white at the pale stitches around the muzzle.
- White clears the pale flecks and the pink return takes the last pink stitch. Black 2 pulls the last dark stitch from the right side.
Colors in this level:
Navy, White, Blue, Cyan, Purple, Gray, Green, Black, Salmon, Tan, Red
Common Mistakes to Avoid
- Waiting for the green outlines to clear before sending the first black 50. Black should already be down to 46 while the outlines remain.
- Mistaking the parked blue 20 for a middle-column supply bobbin. The return sits in storage directly below the track.
Frequently Asked Questions
Which navy bobbin starts the solve?
Navy 40 at the left front. Send right blue 30 after it.
Is black 46 a separate supply bobbin?
No. It is the first black 50 already running on the track. The fresh 50 is in the left supply.
Why is there still a white thread after the lower bands are gone?
The face and muzzle leave a mixed cluster in the center, and white still has cells there.