Yarn Loop level guide
Yarn Loop Level 994 Walkthrough
Unwind the pagoda's black roofs and red windows with linked pairs, and keep an orange bobbin for the patch hidden under the upper-right square.
Verified Board Notes
- Initial Layout Geometry
- A two-story pagoda and small red gate sit on white knit beside pink branches. The square marked 970 is at the upper right. Four columns begin on two linked pairs, pink 20 with white 50 and red 40 with black 30.
- Goal / Target Area
- Strip the roof and window rows, then clear the orange and white patch hidden near the upper-right corner.
- Opening Moves
- Send pink 20 and white 50 before red 40 and black 30. Put the pink and white back on the track at their first return.
- Danger Zone
- Pink 0 can wait in storage attached to orange 9 near the end, while the cover still hides most of the remaining orange.
- Unique Mechanics
- The lime square starts at 970 and breaks as its counter runs out. Most of the late work is done by linked bobbins with an exhausted partner.
Storage: the five slots where returning bobbins park until their color is reachable again. Linked: bobbins joined by a bar leave together and take one track place each.
Quick Tips for Level 994
- You have room for both opening pairs. Start with the pair on the left.
- Use white 12 alongside the late orange to reach the corner stitches once the numbered square opens.
- Leave two track places for red 0 and orange 22 at the end.
How to Solve Yarn Loop Level 994 — Full Solution
- Send the pink 20 and white 50 from columns 1 and 2 together. Follow with the linked red 40 and black 30 from columns 3 and 4 to start on the pagoda.
- Return the first pair when it parks at pink 13 and white 0. Red 37 and black 0 also come back linked. Send them out again so the red can keep stripping the building.
- Follow with the white 50 now available at the far right. Next send the linked orange 20 and red 40 from columns 1 and 2, then the linked pink 20 and orange 30 from columns 3 and 4. These pairs work along the lower edge as the white surrounds pull away.
- When pink 7 and orange 30 are parked together, send the linked red 40 and white 40 from columns 1 and 2. Work it and the red and orange pair around the windows. A partner at zero still travels with the other bobbin, so check for two free places before sending either pair.
- As the cover reaches single digits, use the late parked red 7 and orange 28. Pink 0 and orange 9 wait in storage while the cover stays closed. Return the black 0 and white 12 to work the dark specks and the white around the concealed patch.
- Once the cover breaks, the orange square has small white corners. Send white 2 with black 0 first to remove those corners, then return red 0 and orange 22 together.
- Let that last pair keep circling the isolated upper-right patch. Orange 1 takes the final point and both bobbins leave the track.
Colors in this level:
Pink, White, Red, Black, Orange
Common Mistakes to Avoid
- Treating the numbered cover as the only place to work before the roofs and windows are cleared.
- Trying to send orange 22 on its own when the connected red bobbin is already at zero.
Frequently Asked Questions
What is inside the square marked 970?
When it breaks, there is an orange patch with small white corners beneath it. Keep both colors available for that corner.
Do I send red and black or pink and white first?
Start with the pink and white on the left. Send red and black second while there is still room for that pair.
Why does orange 9 stay parked with an empty pink bobbin?
The two are connected. While the upper-right cover is still closed, there is little exposed orange for that pair to pick up.