Sponsored

Yarn Loop level guide

Yarn Loop Level 995 Walkthrough

medium 7 colors

Peel the white collar and red coat away from the green face in the Santa hat, leaving room for the white bobbin and its two empty linked partners.

Sponsored

Verified Board Notes

Initial Layout Geometry
A green face and white collar sit under a pointed red hat, with a narrow purple panel off to the left. The four opening fronts are two linked pairs, lime 30 with green 20 and white 20 with black 50.
Goal / Target Area
Separate the face, collar and red clothing and clear the isolated stitches near the left panel and hat.
Opening Moves
Send the greens on the left, then white and black on the right. Send red 30 from the third column and red 20 from the fourth as room opens.
Danger Zone
Purple 0, red 0 and white 12 stay together in storage. The gray 9 and green 0 pair can take both remaining storage places.
Unique Mechanics
Each of the four opening fronts sits over a blue cover marked 3. Later linked groups still need a place for each empty member.

Storage: the five slots where returning bobbins park until their color is reachable again. Linked: bobbins joined by a bar leave together and take one track place each.

Quick Tips for Level 995

  • Use the two right-column reds after both opening pairs have left the supply.
  • Leave three track places for the white trio while its purple and red partners sit at zero.
  • Keep the final red available for the hat after most of the green face has gone.

How to Solve Yarn Loop Level 995 — Full Solution

  1. Send the lime 30 and green 20 from columns 1 and 2 together. Then send the white 20 and black 50 from columns 3 and 4 to start on the trim and outline.
  2. Take the red 30 revealed under white and the red 20 revealed under black as space opens. When both greens park at 30 and 20, send them again. Return the white 19 with black 0 when there are two places.
  3. Send purple 20 from the far right, then the red 30 that follows. Work through the gray and green fronts as the numbered covers open, using their laps to cut the black edges and the white collar.
  4. Purple 0 and red 0 return with white 12 and take three storage places. Lime 3 parks in the fourth place; re-send it each time it lands. When the gray 9 and green 0 pair parks in the last two places instead, return that pair to make space in storage.
  5. Send gray 10 and black 50 from the supply while the white trio stays parked. When the pair comes back at gray 10 and black 0, send it again. The other three track places take the parked purple, red and white.
  6. Use the late gray 10 with white 20 to strip the two white and gray patches. Then send green 10 and red 20 together to reach the last green fleck and red hat.
  7. Keep the green and red pair running as the green reaches 0. Red 2 takes the last hat stitch near the middle of the board.

Colors in this level:

Lime, Green, White, Black, Red, Purple, Gray

Common Mistakes to Avoid

  • Counting purple 0 and red 0 as empty storage spaces while both still travel with white 12.
  • Sending another single bobbin into the three free track places when the parked white trio is ready to go.

Frequently Asked Questions

  • Which linked pair goes first?

    Send the lime 30 and green 20 in columns 1 and 2. The white 20 and black 50 on the right are the second send.

  • What can I send when the white trio fills storage?

    Return gray 9 and green 0 together if they occupy the other two slots. At the later exchange leave three free positions on the track to take purple, red and white together.

  • Why is the white 12 still linked to two empty bobbins?

    The three travel as one group. Purple and red stay attached while white still has trim to pick up.