Yarn Loop level guide
Yarn Loop Level 1001 Walkthrough
Clear the purple background from the treasure map, then remove the black outline, white curls and red stitches across the parchment.
Verified Board Notes
- Initial Layout Geometry
- A tan-and-brown treasure map scroll with white curled highlights, a golden-yellow center fold, red trail dots and a black outline sits on a purple field. Three columns open with purple 50, black 20 and purple 50.
- Goal / Target Area
- Strip the wide purple backdrop and right-edge stripe stitches first, then unwind the black outline, tan parchment, white curls, golden fold and red trail dots.
- Opening Moves
- Send purple 50 from column 1 and purple 50 from column 3 first, then send black 20 and the revealed white 10 from column 2.
- Danger Zone
- The track reaches 0/5 (full) mid-game and again near the end. Hold purple 40, black 10 and tan 10 until parked white 4 is re-sent and the track bobbins clear space.
- Unique Mechanics
- All three supply columns hold single bobbins, with no linked groups or covers. The challenge is pacing the big purple 50 and 40 runs alongside the 10-count inner scroll colors.
Track N/5: free places on the moving track: 0/5 means the track is full, 5/5 means it is empty. Storage: the five slots where returning bobbins park until their color is reachable again. Linked: bobbins joined by a bar leave together and take one track place each.
Quick Tips for Level 1001
- Check slot 1 while the lower curl is still intact. If white 4 is there, give it the next free place at the white stripes.
- Re-send brown 3 from slot 1 when only the small upper-left patch and its brown flecks are left.
- Leave black 10 above tan 10 in column 1 while the red dots are still visible beside the gold fold.
How to Solve Yarn Loop Level 1001 — Full Solution
- Send purple 50 from column 1, then purple 50 from column 3. The outside of the purple field shrinks, exposing tan 10 and brown 10.
- Send black 20, white 10 and purple 50 from column 2. The white pass pulls at the short stripes on the right of the scroll.
- Send tan 10, black 10 and purple 40 down column 2. White 4 parks in slot 1 while the lower black edge is still up.
- Send tan 10 from column 1. Re-send white 4 at the right stripes. When two black 9s park, re-send the one in slot 2.
- At the lower curl, send red 10, pale tan 10 and purple 40 from column 1 as places open. Follow with tan 20, black 20 and purple 20.
- When black 10 reaches the front of column 1, send dark brown 10 from column 2 and brown 10 from column 3. Re-send red 10 from slot 1 while the trail is still visible.
- For the exposed parchment, send middle tan 30. Work down column 3 with black 20, white 10, pale tan 10, purple 10 and tan 30 as places open.
- Once the red trail shrinks, finish column 3 with purple 20, purple 40 and dark brown 10. Send black 10 from column 2 when it reaches the front, ahead of that column's last purple.
- At 0/5 (full) with three supply bobbins left, wait for white 4 to park in slot 1. Re-send it, then re-send black 4 when it parks there.
- Send the last purple 40 from column 2, then black 10 and tan 10 from column 1. Black 1 clears before purple 1 takes the last stitch.
Colors in this level:
Purple, Black, Tan, White, Brown, Red, Yellow
Common Mistakes to Avoid
- Treating the two parked black 9s as one return. Sending slot 2 still leaves a black 9 in slot 1.
- Leaving red 10 in storage after the parchment opens. The red trail still needs a pass.
Frequently Asked Questions
What comes after white 10 in column 3?
Pale tan 10. Purple 10 sits behind it while the right side of the scroll comes apart.
What replaces white 4 in slot 1 at the upper-left patch?
After white 4 goes back out, black 4 briefly lands in slot 1. Re-send it from there.
When should the parked red 10 go back out?
Send it from slot 1 when the red dots are still visible below the golden center and the lower curl has thinned.