Sponsored

Yarn Loop level guide

Yarn Loop Level 998 Walkthrough

medium 8 colors

Unravel the clown's black eye patches, blue nose, red smile and gray border until the white stitches in the middle are gone.

Sponsored

Verified Board Notes

Initial Layout Geometry
The white clown face has a red smile, light-blue nose lines, black eyes with green highlights, brown forehead tufts and gray shading. Four columns below open on blue 20, white 40, red 20 and gray 50.
Goal / Target Area
Strip the dark eyes, red smile and outer gray shading, then unwind the white and gray center of the face.
Opening Moves
Send blue 20 and black 30 from column 1, white 40 from column 2, gray 50 from column 4 and gray 10 from column 2. Column 2 then supplies blue 20 and black 30 before column 3 red 20.
Danger Zone
The red 10 from column 1 completes a lap without using yarn. Leave it in slot 1 until the lower smile detaches.
Unique Mechanics
Column 3 supplies white 30, black 30 and white 30 at the close. White 2 takes the remaining white stitches, and gray 1 takes the last gray stitch.

Storage: the five slots where returning bobbins park until their color is reachable again.

Quick Tips for Level 998

  • When gray 10 exposes blue 20 in column 2, use the blue bobbin on the stitches below the smile.
  • While the smile still reaches the right edge, re-send black 9 from slot 2. Leave gray 10 in slot 1 for that exchange.
  • With only column 3 left, start with blue 10 in slot 1 and orange 1 in slot 2. Once both go out, gray 1 parks in slot 1. Re-send it right away.

How to Solve Yarn Loop Level 998 — Full Solution

  1. Send column 1 blue 20 and black 30 at the lower edge, then column 2 white 40. Send column 4 gray 50 and column 2 gray 10. Re-send white 3 from slot 1.
  2. Send column 2 blue 20 and black 30, then column 3 red 20. Re-send black 9 beside the gray 10 parked in slot 1.
  3. At the broad forehead, send column 1 orange 10, gray 50, white 40, orange 10 and gray 50 in order. Re-send red 15 from slot 2 as the smile thins.
  4. When the right lip breaks, send column 4 black 40. Re-send blue 10 from slot 2, then send red 20 and white 30 from column 4.
  5. With the right lip open, send column 1 red 10, column 4 black 30 and column 1 white 30. The red completes its lap at 10 and parks in slot 1.
  6. Leave that column 1 red 10 parked while the forehead breaks into strips. Send column 3 green 10 and white 40, then column 4 red 10 and column 3 orange 10.
  7. As the smile narrows, send column 4 gray 50, black 30, gray 50 and white 30. Send column 3 gray 50 and white 30 between those passes.
  8. When the lower smile detaches, re-send slot 1 red 10. Send the rest of column 2 in order: red 20, blue 10, white 30, black 30, gray 50, white 30 and black 30.
  9. As the face shrinks to the center, send column 3 blue 10, column 1 blue 20 and column 4 orange 10. Then send column 3 gray 50 and column 1 red 10. Re-send blue 10, orange 1 and gray 1 from storage.
  10. With only column 3 left, send white 30, black 30 and white 30. Gray 1 takes the last stitch after white 2.

Colors in this level:

Blue, White, Red, Gray, Black, Green, Brown, Orange

Common Mistakes to Avoid

  • Sending column 4 black 40 during the opening eye pass leaves the earlier black 30 in column 2 unused.
  • Re-sending the column 1 red 10 while the lower smile is still boxed in can leave its yarn unused again.

Frequently Asked Questions

  • Why is there still red in storage with red already on the track?

    The parked red 10 came from column 1 and used no yarn on its first lap. The fresh red 10 in column 4 can run while it waits.

  • Where is the first orange bobbin?

    Orange 10 is in column 1, under black 30. It is available while the clown still has an almost full forehead.

  • What opens the lower right of the smile?

    A red pass removes the right edge. The black 40 and white 30 from column 4 work the eye and lower white rim as the gap widens.