Sponsored

Yarn Loop level guide

Yarn Loop Level 1030 Walkthrough

expert 10 colors

Open the navy frame around the long panel and peel off the cyan lower section, keeping three track places free for the links that reach the pale center.

Sponsored

Verified Board Notes

Initial Layout Geometry
Orange-red corners and cyan rings surround a pale gray center. Five columns begin with red 20, orange 20, tan 20, navy 50 and cyan 20. Orange, tan and navy form one link.
Goal / Target Area
Open the lower blue field before bringing the light gray and tan through the panel's middle.
Opening Moves
Send the triple from columns 2–4 and give it another lap when it parks. Work down the cover in column 2 starting with blue 50.
Danger Zone
Blue 14 stays linked to red 0 and orange 0 in storage. Give the left vertical triple its pass before putting the parked blue group back out.
Unique Mechanics
The numbered covers delay several pairs. Column 4 tan 10 blocks the navy 50 that needs the right red 10.

Storage: the five slots where returning bobbins park until their color is reachable again. Linked: bobbins joined by a bar leave together and take one track place each.

Quick Tips for Level 1030

  • If right red 10 will not move, its linked partner is not exposed yet.
  • Keep two places for the cyan 10 and tan 0 return even after the tan is finished.
  • Re-send the middle triple at light gray 36, tan 0 and orange 0 before you send the left tan 20.

How to Solve Yarn Loop Level 1030 — Full Solution

  1. Send the linked orange 20, tan 20 and navy 50 across columns 2 to 4. Re-send the group at orange 20, tan 7 and navy 0, then again at orange 8, tan 0 and navy 0.
  2. Clear the column 2 cover in order: blue 50, orange 10, red 10, gray 20 and cyan 10. Send the red 10 in column 3 and red 20 on the left while blue works the lower field.
  3. Open the column 4 cover with gray 20, then send navy 50, orange 10 and red 10. Re-send blue 50 as the lower blue starts to open.
  4. Send right cyan 20 and tan 20. Clear column 4 through gray 20, cyan 10 and tan 10. Send the exposed navy 50 with the red 10 on its right.
  5. Send the covered gray 10 from column 2. Send column 3 gray 20 and cyan 10. Send blue 30 and blue 50 from column 2, plus left gray 20 to expose cyan 20.
  6. Send left cyan 20 with orange 10 from column 2, then re-send the parked red 8. Send light gray 40, tan 20 and orange 10 together across columns 2 to 4.
  7. Re-send the middle triple at light gray 36, tan 0 and orange 0. Send left tan 20 next, then navy 50 with cyan 10 from column 2. Send navy 40 from column 3. Re-send the light gray triple as the pale rectangle and orange islands open up.
  8. Send the middle orange 10, then right dark gray 20 and the left orange 10 and cyan 10 pair. Send right light gray 40. Then send right cyan 10 and tan 10 together before light gray 30 underneath.
  9. Send the remaining right orange and red 10s. Send blue 40, red 10 and orange 10 from columns 2 to 4. Re-send light gray 33 and cyan 10 with tan 0.
  10. While blue 14, red 0 and orange 0 are parked, send the left vertical red 10, gray 20 and tan 20. Send left tan 20 and orange 10, then re-send the blue 14 triple. Follow with left dark gray 10 and tan 10.
  11. Send the vertical gray 20, cyan 10 and tan 10 from column 3. Re-send the light gray remainder and the triple at blue 6, red 0 and orange 0. Send the last dark gray 10 from column 3 to clear the last gray cluster.

Colors in this level:

Navy, Blue, Cyan, Red, Orange, Tan, Gray, Light gray, Dark gray, Yellow

Common Mistakes to Avoid

  • Treating the opening navy 50 as a single. With orange 20 and tan 20 it takes three places.
  • Re-sending blue 14 before the left vertical triple. Its red and orange partners still take two places.

Frequently Asked Questions

  • How do I release the red 10 on the far right?

    Clear gray 20, cyan 10 and tan 10 from column 4 until navy 50 reaches the top beside red 10. Send the pair together.

  • When should I re-send the blue 14 triple?

    First send the left vertical red 10, gray 20 and tan 20, then the left tan 20 and orange 10 they expose. The blue group then needs three track places.

  • Why does light gray 40 still need three track places after tan runs out?

    Light gray 40, tan 20 and orange 10 stay linked as one triple. The spent tan and orange still go out with it.