Yarn Loop level guide
Yarn Loop Level 662 Walkthrough
Level 662 clears best when the long green center ribbons, pink-and-purple right-side stripes, and the orange-blue lower edges all shorten together. The main choke arrives in `04:06-04:26`, when only a few narrow green bands can remain with tiny side scraps hanging apart. Keep the whole fan shrinking evenly so one color family does not anchor the endgame by itself.
Verified Board Notes
- Initial Layout Geometry
- The opening board shows a bright abstract fan of diagonal color bands, with yellow at the top-left, pink and purple on the right, green through the middle, and orange plus blue bands along the lower edges.
- Goal / Target Area
- The colorful ribbon field is the full target, but the long green center bands, the pink-and-purple right-side stripes, and the orange-and-blue lower edges all need to shrink together because the late board turns into a few narrow green ribbons with small pink and blue scraps still hanging apart.
- Opening Moves
- Start by shaving the outer stripe tips and the lower blue-and-orange edges while clipping the green center bands and the pink right-side ribbons. Keep the whole fan shrinking together so the board does not stall on one surviving color family.
- Danger Zone
- The slowest stretch is about 04:06-04:26, when the broad fan is gone and only a few green ribbons with tiny pink and blue scraps remain in open space. Pressure drops once the longest green band finally shortens and stops anchoring the smaller crumbs.
- Unique Mechanics
- Level 662 is a pure stripe board with no single center object. The colors peel away at different rates, and the green center ribbons survive much longer than the warm and cool edge bands.
Quick Tips for Level 662 (spoiler-free)
- Trim the lower blue-and-orange edges while clipping the green center ribbons and pink right-side stripes.
- Keep cutting across the full fan so no single color family stays much longer than the others.
- In `04:06-04:26`, shorten the surviving green ribbons before chasing pink or blue singles.
How to Solve Yarn Loop Level 662 — Full Solution
- Open on the outer stripe tips and the lower blue-and-orange edges while trimming the green center and pink right-side ribbons.
- Keep clipping across the whole fan so the stripe lengths shrink at the same pace.
- Remove the tiny detached color crumbs early instead of leaving them around the frame.
- During `04:06-04:26`, focus on shortening the surviving green ribbons before the pink or blue singles.
- Wrap the board by taking the last green bands first, then the pink scraps, and finally the blue and orange edge crumbs.
Common Mistakes to Avoid
- Attempting to solve without mapping the entire dependency chain between all color routes.
- Treating all colors as equal priority — find the route that will be blocked first and clear it.
- Missing the cascade technique: intentionally opening one route to unlock two subsequent clears.
Frequently Asked Questions
Why does Level 662 get slow after most of the side colors are already gone?
The input says the late board can reduce to a few green ribbons with tiny pink and blue scraps nearby. The slowdown ends only when the longest green band finally shortens and stops anchoring the smaller crumbs.
What should I prioritize during `04:06-04:26` in Level 662?
Take the surviving green ribbons first. The danger note says pressure drops once the longest green band stops anchoring the small pink and blue scraps.
What opening route prevents a one-color finish in Level 662?
Trim the outer stripe tips, lower edges, green center, and pink ribbons together from the start. The objective paragraph warns that the ending slows if the side colors vanish while the green center stays long.