Sponsored

Yarn Loop level guide

Yarn Loop Level 864 Walkthrough

easy 11 colors

Open the fishbowl's water and rim until the lime cover lifts, clear the maroon stand tiers, then unravel the clownfish, weed and sand.

Sponsored

Verified Board Notes

Initial Layout Geometry
A fishbowl with a cyan rim, light- and dark-blue water, green weed and yellow sand; a lime 50 cover hides the clownfish, and a dark maroon stand has dashed tiers marked 50, 30 and 20.
Goal / Target Area
Clear the cyan rim, the blue water and the black outline, then the three maroon stand tiers, and finally the clownfish, the green weed, the yellow sand and a lone blue dot.
Opening Moves
Cyan 10, light-blue 50 and black from the first column, then maroon 20 into the bottom stand tier and dark blue 20 into the lower-right water.
Danger Zone
While white and yellow run with black 30, the track fills up. It fills up again when orange, light blue and green finish the fish, so only send once a piece runs out.
Unique Mechanics
A lime cover marked 50 hides the clownfish and lifts after the opening bobbins pull enough stitches. The dashed maroon stand tiers (50, 30, 20) count down as maroon bobbins pull them.

Storage: the five slots where returning bobbins park until their color is reachable again.

Quick Tips for Level 864

  • Open the bowl with cyan, light blue and black; the lime 50 cover lifts on its own and shows the clownfish.
  • Send maroon bobbins only into the dashed stand tiers, which count down from 50, 30 and 20.
  • Expect a full track while white, yellow and black 30 run together. Wait for one of them to finish before you send anything else.

How to Solve Yarn Loop Level 864 — Full Solution

  1. The fishbowl's lime 50 cover hides the fish in the middle, and a dark maroon stand of dashed tiers marked 50, 30 and 20 sits underneath. Open the water first.
  2. Send the first column's cyan 10, light-blue 50 and the black bobbin beneath them. Cyan works the rim, light blue the water and black the bowl's outline; the 50 cover counts down as stitches come off and lifts to reveal an orange-and-white clownfish with a red outline.
  3. Send maroon 20 into the bottom stand tier, then dark blue 20 into the dark-blue water on the lower right. Park the cyan remainder in storage while the rim has no free cyan stitch, and bring it back once the light blue has opened more of the top edge.
  4. Send maroon 10 and then the next maroon 20 into the stand, which drops from 50/30 to 50/20 and then to 48/2, while the second light-blue 50 thins the water above the fish into separate strips.
  5. Send green 10 into the weed beside the sand and black 30 along the outline under the bowl. Return the parked light-blue 42 to finish the left-hand water.
  6. Send yellow 20 into the sand once the water above it is gone, then the next cyan 10 and light-blue 50 against the remaining water. Red 10 works the fish's red outline; park its short remainder if the red edge stops being reachable.
  7. Send white 20 into the bubbles and the white fish stripes, followed by black 30, yellow 10 and white 10, which sit stacked in the third column. This is the busiest stretch and the track fills up, so wait for one of these to run out before sending anything new.
  8. Send maroon 20 and then maroon 30 into the stand; the tiers count down through 30 and 18 until the whole stand is gone. Send orange 30 into the fish body at the same time.
  9. With only the fish left, send the green and dark-green 10s into the weed under its belly, then orange 10/20, light-blue 40 and the white returns against the body and the leftover water around it.
  10. The last pieces are the fish's red outline, a few yellow and blue pixels under it and one dark-blue dot to the right. Send black 30, blue 10 and red 20 as those spots show, plus the parked white 9 and light blue 9.
  11. Send the last orange 10 into the final fish pixels to empty the bowl.

Colors in this level:

Cyan, Light blue, Blue, Black, Maroon, Green, Dark green, Yellow, White, Red, Orange

Common Mistakes to Avoid

  • Sending maroon before a dashed stand tier is reachable, so it takes up a track place with nothing to pull.
  • Launching another long bobbin when the track is full while white, yellow and black 30 are running.
  • Stopping when only the fish is left, while a single dark-blue dot to its right still needs clearing.

Frequently Asked Questions

  • What is the opening sequence for Level 864?

    Send cyan 10, light-blue 50 and black from the first column, then maroon 20 into the bottom stand tier and dark blue 20 into the lower-right water.

  • What is the lime 50 panel?

    It is a cover over the middle of the bowl. Once the opening bobbins pull enough stitches it lifts and shows an orange-and-white clownfish.

  • Why does a maroon bobbin have nothing to pull in Level 864?

    Maroon only works the dashed stand tiers under the bowl, which count down from 50, 30 and 20. Send maroon only when a tier is reachable, starting with maroon 20 on the bottom tier; sent early, it just takes up a track place.

Sponsored